Shrink Material
Since its establishment in 2017, the company has been focusing on the field of vascular intervention and is determined to provide high-quality and affordable intervention consumables for global partners. We can provide not only semi-finished products, but also finished products. Our team has more than 10 years Production and sales experience in CAD/PAD. We have provided products and service to all over 30+ countries, and expect to expand our footprint more fast in the coming new years.
Why Choose Us
Expertise
Our team has expertise in the latest CAD/PAD technologies and a wealth of experience in the industry. We stay up-to-date with the latest advancements in the field, so you can rest assured that you are receiving the highest quality services.
Quality Control
We have a strict quality control process to ensure that the products we produce and the services we provide meet or exceed industry standards. You can trust us to deliver consistent, reliable, and accurate results every time.
Certification
We and our partners in China have obtained ISO 13485 and CE certification.
Customer Service
We strive to provide excellent customer service and support throughout every stage of the project. Our team is always available to answer questions, provide guidance, and offer assistance whenever you need it.
Advantages of Ptfe Heat Shrink
High temperature resistance
The working temperature is up to 260℃, while the working temperature of ordinary heat shrink tubing is usually between 1255~135℃.
Corrosion resistance
It is inert to most chemicals and solvents, and can withstand strong acids, alkalis, water and various organic solvents.
Weather resistance
It has the best aging life among plastics.
High lubricity
It has the lowest friction coefficient among solid materials. Non-adhesive: It has the smallest surface tension among solid materials and does not adhere to any substance.
High shrinkage ratio
PTFE heat shrink tubing has a high shrinkage ratio and can shrink to 50%~70% of its original size at high temperature, and will remain in a shrunk state after cooling, so it can be used in various occasions that require shrinkage, fixing, sealing, etc.
Products Description
|
Property |
Requirement |
Test method |
Typical data |
|
Longitudinal shrinkage |
≤10% |
ASTM D 2671 |
≤5% |
|
Tensile strength |
≥17.3 MPa |
ASTM D 2671 |
≥ 22MPa |
|
Elongation at break |
≥200% |
ASTM D 2671 |
≥300% |
|
Dielectric voltage withstand |
2500V,60sec, no breakdown |
ASTM D 2671 |
Pass |
|
Volume resistivity |
1015Ω·cm min. |
ASTM D 876 |
1016Ω·cm |
|
Corrosion |
No corrosion |
ASTM D 2671 |
No corrosion |
|
Flammability |
VW-1 |
UL224 |
Pass |
|
Dielectric constant |
|
|
2.1 |
|
Friction coefficient |
|
|
0.1 |
|
Size |
ID as supplied |
ID After shrinked |
Wall after shrinked |
|
1.7:1 |
|||
|
φ0.5 |
0.7±0.2 |
≤0.30 |
0.15±0.05 |
|
φ1.0 |
1.0±0.2 |
≤0.60 |
0.15±0.05 |
|
φ1.5 |
1.5±0.2 |
≤0.90 |
0.15±0.05 |
|
φ2.0 |
2.0±0.2 |
≤1.30 |
0.15±0.05 |
|
φ2.5 |
2.5±0.2 |
≤1.50 |
0.15±0.05 |
|
φ3.0 |
3.0±0.2 |
≤1.80 |
0.20±0.05 |
|
φ3.5 |
3.5±0.2 |
≤2.0 |
0.20±0.05 |
|
φ3.8 |
3.8±0.2 |
≤2.2 |
0.20±0.05 |
|
φ4.0 |
4.0±0.3 |
≤2.5 |
0.20±0.05 |
|
φ4.5 |
4.5±0.3 |
≤2.7 |
0.20±0.05 |
|
φ5.0 |
5.0±0.3 |
≤3.0 |
0.20±0.05 |
|
φ6.0 |
6.0±0.3 |
≤3.6 |
0.25±0.05 |
|
φ6.5 |
6.5±0.3 |
≤4.0 |
0.25±0.05 |
|
φ7.0 |
7.0±0.3 |
≤4.2 |
0.25±0.05 |
|
φ8.0 |
8.0±0.3 |
≤4.8 |
0.25±0.05 |
|
φ9.0 |
9.0±0.3 |
≤5.3 |
0.25±0.05 |
|
φ10.0 |
10.0±0.2 |
≤5.8 |
0.25±0.05 |
|
φ11.0 |
11±0.2 |
≤6.8 |
0.25±0.05 |
|
φ12 |
12±0.2 |
≤7.1 |
0.35±0.05 |
|
φ14 |
14.0±0.3 |
≤8.2 |
0.35±0.05 |
|
φ15 |
15±0.3 |
≤15 |
0.35±0.05 |
|
φ16 |
16±0.3 |
≤9.4 |
0.35±0.05 |
|
φ17 |
17±0.3 |
≤10 |
0.35±0.05 |
|
φ18 |
18±0.3 |
≤10.5 |
0.35±0.05 |
|
φ19 |
19±0.3 |
≤11.2 |
0.35±0.05 |
|
φ20 |
20±0.3 |
≤11.8 |
0.35±0.05 |
|
φ21 |
21±0.3 |
≤12.3 |
0.35±0.05 |
|
φ22 |
22±0.3 |
≤12.6 |
0.35±0.05 |
|
4:1 |
|||
|
φ2.5 |
2.5±0.2 |
≤0.7 |
0.15±0.1 |
|
φ3.2 |
3.0±0.2 |
≤0.8 |
0.15±0.1 |
|
φ4.0 |
4.0±0.2 |
≤1 |
0.15±0.1 |
|
φ5.0 |
5.0±0.2 |
≤1.2 |
0.15±0.1 |
|
φ6.0 |
6.0±0.2 |
≤1.5 |
0.15±0.1 |
|
φ7.0 |
7.0±0.2 |
≤1.8 |
0.2±0.1 |
|
φ8.0 |
8.0±0.3 |
≤2 |
0.2±0.1 |
Product Features
Strong acid and alkali resistance, wear resistance, voltage resistance
Bio-compatibility
High power shrinkage ratio, good insulation performance
Resistance to high and low temperature-80 to 260 C
It has shrinkage ratios of 1.7:1 &2:1 &4:1
|
Performance characteristic |
||
|
Characteristic |
Experimental method |
Typical performance |
|
Density |
ASTM D792 |
2.12-2.17 g/cc |
|
Hardness (D) |
- |
60D |
|
Tensile Strength (Mpa) |
ASTM 0638 |
27-35MPA |
|
Elongation (%) |
ASTM 0638 |
280-400% |
Production process
PTFE resin, extruder → Mixing → Storage → Preforming → Pushing → Drying → Sintering → Cooling → Heat treatment → Blowing → Cooling → Product.
The front part is the same as the ordinary PTFE tube.
Heat treatment: The process of quenching the dried and sintered pipe after further full sintering at high temperature, the temperature is 390℃±2℃, and the coolant is -5℃.
Blowing: At about 310℃, fill the compressed gas below 0.98MPa, the blowing rate is 200%-400%.
Main equipment: Blowing machine, other and ordinary PTFE pipe same.
Specialized Services
Custom Cutting
We cut your non-shrink and heat shrink tubing to any length that you require.
Custom Printing
We make your non-shrink and heat shrink tubing unique by adding your logos, company names, part numbers, serial numbers, and more.
Custom Packaging
We get your tubing products specifically packaged to match your requirements.
Warehousing&Shipping
We're well-known as one of the leading shrink material manufacturers and suppliers in China. Please feel free to wholesale high quality shrink material at competitive price from our factory. For custom service, contact us now.
Shrink Material, Medical Heat, Fep Heat Shrink Tubing