enLanguage
video
Ptfe Heat Shrink

Ptfe Heat Shrink

PTFE heat shrink tubing is made of high-performance medical grade polytetrafluoroethylene material. polytetrafluoroethylene has the best physical properties of plastics, with the highest performance in electrical properties, low friction coefficient, solvent resistance, and high temperature resistance. Its uniform structure helps to ensure consistency and high performance, making the product almost free from defects, pinholes, seams, cracks, or miscellaneous points.

Product Introduction

PTFE heat shrink tubing is made of high-performance medical grade polytetrafluoroethylene material. polytetrafluoroethylene has the best physical properties of plastics, with the highest performance in electrical properties, low friction coefficient, solvent resistance, and high temperature resistance. Its uniform structure helps to ensure consistency and high performance, making the product almost free from defects, pinholes, seams, cracks, or miscellaneous points.

 

Manufactuer PTFE heat shrink

 

Product features

 

◎ Shrinkage rate: non shrinkage, 1.7:1

◎ Service temperature: -65 ° C~200 ° C

◎ Shrinkage temperature: ≥ 350 ° C

◎ Excellent electrical insulation performance, physiological inertness

◎ Meet SO10993-1

◎ Meet ethylene oxide (ET0), gamma sterilization

◎ Environmental protection standards: Meet RoHS

◎ Standard color: Transparent

 

PTFE heat shrink tubing

Testing standards

Index

Vertical change rate/%

ASTM D2671

≤15%

Tensile strength/MPa

ASTM D2671

≥19

Breaking elongation/%

ASTM D2671

≥200

Breakdown strength (Kv/mm)

IEC243

≥26

Volume resistivity/Ω. CM

IEC93

≥1014

Flame retardancy

ASTM D2671

VW-1

 

Raw material information

 

Pure PTFE (Polytetrafluoroethylene)

Heat resistant from – 200 °C to + 260 °C (- 328 °F to +500 °F)

Shrinking temperature of 330 °C +/- 10 °C (626 °F +/- 10°F

Universal chemical resistance

Anti-adhesive

product-492-240

Order infomation (no shrink):

Model

ID(mm)

OD(mm)(S)

OD(mm) (T)

OD(mm)(L)

Package standard

M/coil

M/coil/PC

1004

 

Order infomation (PTFE heat shrink)

Model mm

Before shrink mm

After shrink mm

Package standard

Product ID

ID

Thickness

M/coil

M/pc

1005

 

Originally developed for the electrical industry, our PTFE heat shrink tubes with 2:1 shrinking ratio are mainly used, based on the possible combinations of different wall thicknesses, in medical and laboratory applications, wire and cable assembly, as well as in the food industry.

 

Hot Tags: ptfe heat shrink, China ptfe heat shrink manufacturers, suppliers, factory, Peel Away Sheath Catheter, Guide Sheath Kit, 11 French Sheath, Catheter Used In Angiography, Diagnostic Cardiac Cath, Diagnostic Catheter

Send Inquiry

whatsapp

skype

E-mail

Inquiry

Bag